UniBus 8 Relay Auxiliary Expander
996515PCB&K
The UniBus 8 Relay Auxiliary Expander provides 8 independent, high current normally open or normally closed relay outputs, offering a general purpose interface in applications such as warning devices (strobes, etc.), building automation and process control.
The UniBus 8 Relay Expander is designed for installation within the same tamper-protected enclosure as its UniBus host module. The UniBus device is connected directly to the host module or another UniBus device via the UniBus patch cable supplied.
Host Module Compatibility
The UniBus 8 Relay Expander is compatible with the following UniBus Host Modules:
Integriti ISC Controller (Part. 996001 series) - Connect up to 4
Integriti IAC Controller (Part. 996035PCB&K) - Connect up to 4**
8 Zone RS-485 LAN Expander (Part. 996005PCB&K) - Connect up to 4
ILAM RS-485 LAN Access Module (Part. 996018PCB&K) - Connect up to 2*
* Relays will mimic the Lock & DOTL outputs on ILAM doors 1-8 (Aux 1~16)
**Relays can be used for general purpose outputs when mapped to Aux 1~16 on IAC, and will mimic the Lock & DOTL outputs on doors 1-8 when mapped to Aux 17~32
Module Features
• 8 Universal Relay Outputs
Normally Open or Normally Closed Outputs per relay
DIP switch addressable first Auxiliary (Relay) 1, 9, 17 or 25
UniBus loop-through connectors
2 LED status/fault indicators
Over-The-Wire firmware upgradable
Inner Range “C” size footprint 94 x 94mm
Can be installed above other “C” size PCB’s*
A Snap off strip is included to allow installation above Inner Range “B” size PCB’s**
* 35mm standoff kit required - Part Number 999009
