top of page

UniBus 2 Door 2 Reader Expander

996535PCB&K

The UniBus 2 Door / 2 Reader Expander can be used to provide control and monitoring of 2 additional Doors or Readers on a compatible UniBus host module. When connected to the Intelligent LAN Access Module, the UniBus 2 Door / 2 Wiegand Reader expander can provide installation configurations for 4, 6 or 8 doors. SIFER or third party OSDP RS-485 readers can be assigned via the host module for Read In & Read Out access control on each door.


The UniBus 2 Door / 2 Reader Expander is designed for installation within the same tamper-protected enclosure as its UniBus host module. The UniBus device is connected directly to the host module or daisy-chained to another UniBus device via the UniBus patch cable supplied. Up to 3 UniBus 2 Door / 2 Reader Expander devices can be connected.


Host Module Compatibility

The UniBus 2 Door / 2 Reader Expander is compatible with the following UniBus Host Modules:


UniBus 2 Door 2 Reader Expander
Module Features
  • Provides an additional 2 Doors / 2 Wiegand Readers for Host Module

  • Assign Read In & Read Out SIFER or third party OSDP RS-485 readers for each door via the Host Module

  • UniBus connectivity to Host Module

  • Reader options to control Doors, Lifts, Areas and User Logon

  • Supports Wiegand card readers up to 88bits

  • Reader outputs with individual self-resetting over current protection

  • UniBus loop-through connectors

  • LED Status & Fault Indicators

  • Dedicated lock power input

  • Heavy duty lock relays

  • Reader Valid & Invalid Outputs

  • Door reed & tongue sense inputs per door

  • Door request to enter & exit inputs per door

  • DOTL relay outputs per door

  • Integriti “B” size footprint 200 x 94mm

  • Over-The-Wire firmware upgradable

bottom of page