Sporting a stylish, waterproof, dust proof and vandal resistant brushed aluminium case, the Weatherproof Terminal from Inner Range adds yet more versatility to the Concept 4000 stable of security and access control products.

This device is perfect for gate or door access control in exposed environments. In addition to 1 door access control, one can also separately arm and disarm their alarm system or a portion thereof using the Weatherproof Terminal. Along with the area control, there is visible feedback of “valid / invalid PIN” entry as well as “area armed / disarmed” status.

The attractive fully sealed case belies the Terminal’s toughness and IP68 rating. Piezo effect keypad buttons mean there are no moving parts, enhancing the sturdiness of the device.

Security of the mechanical installation is maintained by three separate inputs that can generate a Tamper alarm: cabinet tamper (Reader Module housing), keypad tamper and keypad cable tamper.

Connection of the keypad to the Concept 4000 system is by means of a supplied Reader Module. 1m flying leads from the back of the keypad allow the Reader Module to be housed in a more sheltered location separate to the keypad.

Easier to program, tighter integration...

Unlike previous solutions utilising third party products, this wholly Inner Range solution does not require special user programming. With this terminal, all normal system users have the full range of user PIN code functionality similar to that of a normal Elite Keypad.

The new Weatherproof Terminal offers more features and tighter integration than third-party weatherproof terminal solutions for Concept systems.

Features:

• Keypad
• Attractive, rugged case is highly vandal resistant
• Fully waterproof and dust proof IP68 rated case with no moving parts
• Control one door per Terminal
• Control a security area associated with the door or user’s special area
• Piezo effect pushbuttons with audible feedback
• Easy to install
• Displays login status and area status with “Code” and “Armed” LEDs
• Keypad lockout feature if >3 incorrect logins in a row
• Flying leads provide option to house Reader Module in more sheltered location


• Modified Reader Module PCB
• Provides reed and tongue sense monitoring
• Request to Enter (REN) and Request to Exit (REX) inputs provided
• On-board lock relay
• Fuse protection of keypad power

Download data sheet

Physical
Keypad Dimensions	130(L) x 81(W) x 21(D) (mm)
Keypad Installation Environment	-20° – +70°C @ 100% Relative humidity
PCB Dimensions	95(L) x 95(W) (mm)
PCB Installation Environment	0° – 40°C @ 15% to 85% Relative humidity (non-condensing)
Electrical
Power Supply Input	11-14V DC (Typically from separate power supply)
Operational Current	15mA
Max	105mA with lock relay active. (Including max keypad current)
Fuse Protection	500mA
Inputs
Zone Inputs	5 (May have predefined functions depending on programming options selected)
Door Inputs	Door Reed, REX, REN, Tongue Sense and Arm button
Reader Ports	1 (used for keypad)
Outputs
Relay	1 (Typically used for door locks)
Physical Auxiliaries	5 (3 reserved for Valid/Invalid, Area Armed/Disarmed indication and beeper)