The Universal Expander module provides an additional 16 Zone inputs, 8 Auxiliary outputs and 2 Siren drivers.

New Features!

• Select Inner Range EOL Resistor values, or one of 6 alternate EOL schemes
• Extra DET+ outputs
• Battery deep discharge protection
• Enhanced surge protection
• Detailed labelling of DIP switches and links
• Field upgradeable firmware

 

Lift Control Applications
The optional Lift Interface board enables extensive control and monitoring of lift car operation and floor access. Up to 32 floors may be controlled and monitored per Universal Expander using up to four optional Lift Interface boards (994020) and a Lift Interface Extension Cable (605020).

Note: Universal Expander shown above is in an optional larger enclosure together with optional Lift Interface boards, power supply and battery brackets.

Expansion Options

• 16 Zone Expander board (995006)
• 24 Auxiliary Expander board (995007)
• 8 Relay Expander boards (995082E)
• Lift Interface boards (994020)

Features:

• 16 zone inputs, expandable to 32 by use of the optional 16 Zone Expander board (995006)
• 8 auxiliary outputs, expandable to 32 using the optional 24 Auxiliary Expander board (995007) or 3 x 8 Relay Expander boards (995082E)
• 2 independent siren driver outputs
• Cabinet tamper , siren tamper, power supply fuse and battery status monitoring
• Fuse protection of LAN, Detector and Siren outputs, Battery circuit
• 2 Amp power supply

Download Universal Expander data sheet
Download Expander Module Options data sheet

Physical
Cabinet Dimensions	460(L) x 358(W) x 85(D) (mm)
PCB Dimensions	180(L) x 180(W) x 40(D) (mm)
Installation Environment	0° – 40°C @ 15% to 85% Relative humidity (non-condensing)
Cabinet Battery Bracket	To suit 12V 7AH Sealed Lead Acid battery
Electrical	Plugpack Versions	Transformer Versions
Mains Input Voltage	240VAC, 50Hz	240VAC, 50Hz
Mains Input Current	100mA	500mA
Input Voltage to PCB	16-18VAC	16-18VAC
Fuse Protection	Separate fuses for Battery , Siren 1, Siren 2, LAN & Detector Power
Current Consumption
Total Current Limit	1.3A	2.2A
Operational Current (No peripherals connected)	150mA	150mA
Recommended allowance for battery charging	300mA	300mA
Available Current (for relays, detectors, auxiliaries , etc.)	850mA	1.7A
Inputs
Zone Inputs	16 (Expandable to 32 with optional 16 Zone Expansion board 995006)
Cabinet Tamper Input	Yes
Outputs
Siren Outputs	2 (Internal & External) Max Load: 2 x 8 Ohm, 10 Watt siren speakers
Outputs (open collector)	8 (Expandable to 32 with optional 24 Auxiliary Expansion board 995007)
Max. Switchable Current per Aux.	Aux.1&2:500mA, Aux.3-8:200mA
Relays	Expandable to 24 with optional 8 Relay Expander boards 995082E- replaces Auxiliaries 9-32