The 2 Door Access module is an economical two door, two card reader access module. It can control two doors with two readers, or one door with in and out readers.

Flexibility Plus
Readers can be configured independently allowing mixed technologies on the one reader.

Enterprise Level Access Control

The Two Door Access module fully supports the advanced Concept access control features: i.e. soft / hard / timed anti-passback, dual user, card and PIN, free access via timezones etc. read more.

 

 

Features:

• Supports magnetic swipe or Wiegand card readers without the need for an additional interface
• Standard version supports offline database of up to 31 backup cards
• Card Cache version supports offline database of 35 backup cards, plus dynamic cache of 110 cards per reader
• Provides reed and tongue sense monitoring
• Request to Enter (REN) and Request to Exit (REX) inputs provided
• Door Open Too Long (DOTL), valid and invalid outputs
• On-board lock relays
• Fuse protection of Reader head power

Download data sheet

Physical
Cabinet Dimensions (Standard Versions)	305(L) x 140(W) x 72(D) (mm)
Cabinet Dimensions (Powered Versions)	252(L) x 358(W) x 85(D) (mm)
Installation Environment	0°C - 40°C @15 - 85% Relative humidity (non-condensing)
Electrical
Input Voltage to PCB	11-14VDC
Operational Current	70mA (No relays active and no external load)
Max	210mA
Fuse Protection	500mA
Inputs
Zone Inputs	7 (May have predefined functions depending on programming options selected, i.e.: Door Reed, REX, REN, Tongue Sense and Arm)
Reader Ports	2
Outputs
Relay	2 (Typically used for door locks)
Outputs (open collector)	4 (Typically used for Valid/Invalid indication)
DOTL pre-warn	2 (1 per door)