Inner Range - Concept: Serial UART

Plugging directly on to the Control Module, Serial UART boards provide up to four high-speed, software configurable, serial ports to allow interaction with third party building automation systems and connection of peripheral serial devices to the Concept 4000 Control Module.

Up to four simultaneous connections can be maintained using the UART board - an operator using Insight can be communicating with a Control Module whilst the Control Module is interacting with building automation systems and so forth.

Specific cables are available for connection to printers, modems, PCs and 3rd party interfaces.

Features:

Available in Single, Dual or Quad port versions
Connects directly to the Concept 4000 Control Module
Allows communication speeds of up to 19200 baud

Download data sheet

Physical

PCB Dimensions

115(L) x 104(W) (mm)

Installation Environment

0°C - 40°C @15 - 85% Relative Humidity
(non-condensing)

Electrical

Power Supply Input

Via Host Control Module

Operational Current (Min).

20mA

Inputs

Serial Ports

1 or 2 or 4 full RS232

Max. Baud Rate

Support a max of 38,400 baud. Note that if all 4 ports are used, the sum of the Baud rates must not exceed 38,400; (e.g. Ports 1-19,200, Port 2-9,600, Port 3-9,600).

Features:

Connectivity