The RF Expander module provides connectivity to the Visonic range of wireless devices. This module allows seamless functionality for up to 32 zones and 4,000 key fobs. Wireless detectors reduce installation time and cost, whilst key fobs provide secure arming and disarming of the system as well as remote operation of outputs such as lighting and doors etc.

Large range of wireless devices
The RF Expander module is compatible with the Powercode™ and CodeSecure™ 433MHz range of Visonic transmitters. These families support a wide range of devices. See www.visonic.com for further information.

Connectivity

The RF expander is connected directly to the Concept RS485 LAN. Up to 64 RF Expander modules may be installed in a single panel system. (Note that a custom memory configuration is required if more than 16 RF Expander modules are to be connected to a single panel system).

No compromise on security

The RF Module identifies each wireless device by a unique 24bit ID command code. In addition to this all transmissions are protected by 64bit encryption technology preventing unauthorised access to the system.

Features:

• Encrypted wireless transmissions protect system from unauthorised access
• Connectivity for up to 32 wireless detectors and 4000 key fobs
• Key fob functionality can be tailored for each user
• Secure wireless arm/disarm
• Auxiliary control
• Wireless panic input
• Detector signal supervision
• Low battery reporting

Download data sheet

Physical
Enclosure Dimensions	238(L) x 118(W) x 74(D) (mm)
PCB Dimensions	87(L) x 73(W) x 10(D) (mm) including receiver
Installation Environment	0° – 40°C @ 15% to 85% Relative humidity (non-condensing)
Electrical
Power Supply Input	11VDC (From LAN or separate battery backed external power supply)
Operational Current	25mA
Inputs
Zone Inputs	32 Wireless zones
Key Fob (MCT-234W)	Up to 100, depending on Control Module memory configuration (Up to 4000 with custom memory configuration)
RF Frequency	433.92MHz