Control

Terminals

The Mini Expander module provides a cost effective solution whenever a small number of Zones and Auxiliaries are required.

The Mini Expander module is available in both powered or unpowered forms. The powered Mini Expander module (995086PS) is supplied in a larger cabinet and comes complete with a 2 Amp DC power supply with battery recharging circuitry.

Features:

8 zone inputs
8 auxiliary outputs
Supplied in a plastic utility enclosure for easy mounting
Programmable input de-bounce time
Event counting facility
Supplied in a metal enclosure or plastic utility enclosure for easy mounting

Download Mini Expander data sheet
Download Expander Module Options data sheet

Exclusive Features

The Mini Expander module has a programmable de-bounce feature for increased sensitivity to inputs such as hold-up buttons, event counting and monitoring of electronic plant equipment. The input counting feature enables accurate monitoring of events and/or customer activity.

Connectivity

The mini expander is connected directly to the Concept RS485 LAN. Up to 99 mini expanders may be installed in a system comprising a single Concept 4000 Control Module panel.


Physical
Cabinet Dimensions (Unpowered Version)	305(L) x 140(W) x 72(D) (mm)
Cabinet Dimensions (Powered Version)	252(L) x 358(W) x 85(D) (mm)
PCB Dimensions	140(L) x 95(W) (mm)
Installation Environment	0°-40°C @ 15% to 85% Relative humidity (non-condensing)
Cabinet Battery Bracket	To suit 12V 7AH Sealed Lead Acid battery
Electrical	PCB Versions	Transformer Versions
Mains Input Voltage	N/A	240VAC, 50Hz
Mains Input Current	N/A	500mA
Input Voltage to PCB	11-14VDC	16-18VAC
Current Consumption
Total Current Limit	N/A	2.0A
Operational Current (No peripherals connected)	30mA	30mA
Recommended allowance for battery charging	N/A	300mA
Available Current (for relays, detectors, auxiliaries , etc.)	Power Supply source dependent	1.6A
Inputs
Zone Inputs	8
Programmable Input De-bounce	5mS to 1250mS, programmable per zone input
Outputs
Outputs (open collector)	8
Max. switchable current per Auxiliary	Aux.1:500mA, Aux.2-8:200mA
Relays	Expandable to 8 with optional 8 Relay Expander Board 995082E - replaces on-board Auxiliaries